PRODUCTS
1200℃ Laboratory Vacuum Furnace
1200℃ Vacuum Furnace
Double sealing Door
Ceramic Fiber Chamber
Industrial Chiller
Introduction
The STZ 1200C degree heat treat vacuum furnace provides the perfect environment for various procedures in many laboratories, providing the controlled temperature and atmosphere specific projects require. The vacuum or controlled atmosphere is desired to complete tasks that require exact temperatures with no room for error. This is the best way to ensure the successful outcome of your project because it is sealed tightly to ensure the proper environment.
Main Features
Tmax 1200 °C
High quality light mullite refractory brick （ceramic fiber are optional)
High level HRE heating wire wearing on the ceramic tube
Heating from three sides for an optimal temperature uniformity
High sealing performance, Max vacuum level up to 0.01Pa
Available for inert gases such as N2, Argon etc.
Thermocouple type N (1260 °C)
Temp Controller Shimaden SRS13A (4 programs with each 8 segments)
Optional Accessories
Industrial chiller
Vacuum gauge
Vacuum pumps
Built-in RS485 port and USB adaptor for computer control
Mass flow meter
|
Model No. |
TMax (℃) |
Inner Chamber Dimensions （mm） |
Volume （I） |
Power Supply |
||
|
W |
D |
H |
||||
|
STZ-8-12 |
1200 |
200 |
200 |
200 |
8 |
3KW/1-Phase |
|
STZ-12-12 |
1200 |
200 |
300 |
200 |
12 |
4KW/1-Phase |
|
STZ-18-12 |
1200 |
250 |
300 |
250 |
18 |
5KW/1-Phase |
|
STZ-30-12 |
1200 |
300 |
500 |
200 |
30 |
7.5KW/3-Phase |
Note:Chamber Size could be customized as per requests
1400℃ Laboratory Vacuum Furnace
1400℃ ceramic vacuum furnace
Inner Chamber (optional SIC rods Heater)
Control Panel
Introduction
STZ 1400 series sintering vacuum furnace feature a sealing chamber with Mitsubishi (Japan) high quality alumina fiber insulation and MoSi2 heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Designed water inlet and outlets for furnace cooling supply a good outside temperature for vacuum furnace heat treating.
Main Features
Tmax 1400 °C
1600 grade ceramic fibre as insulation material
High quality light mullite refractory brick as optional
High quality Powerful SiC rods
Heating from two sides
High sealing performance, Max vacuum level up to 0.1Pa
Available for inert gases such as N2, Argon etc.
Thermocouple type S (1460 °C)
Temp Controller Shimaden SRS13A (4 programs with each 8 segments)
Optional Accessories
Industrial Chiller
Vacuum gauge
Extra set of SiC heaters
Vacuum pumps
Mass flow meter
Built-in RS485 port and USB adaptor for computer control
Model No. | TMax (℃) | Inner Chamber Dimensions （mm） | Volume （I） | Power Supply | ||
W | D | H | ||||
STZ-8-14 | 1400 | 200 | 200 | 200 | 8 | 5KW/1-Phase |
STZ-12-14 | 1400 | 200 | 300 | 200 | 12 | 5KW/1-Phase |
STZ-18-14 | 1400 | 250 | 300 | 250 | 18 | 6KW/1-Phase |
STZ-36-14 | 1400 | 300 | 400 | 300 | 36 | 12KW/3-Phase |
Note:Chamber Size could be customized as per requests
1700℃ Laboratory Vacuum Furnace
1700℃ Series Vacuum Annealing Furnace
Inner Chamber
Introduction
The 1700C series heating vacuum furnace provides the perfect environment for various procedures in many laboratories and industries, providing the controlled temperature and atmosphere specific projects require. The controlled atmosphere is desired to complete tasks that require exact temperatures with no room for error. This is the best way to ensure the successful outcome of your project because it is sealed tightly to ensure the proper environment.
Main Features
Tmax 1600 °C (under vacuum atmosphere)
1800 grade ceramic fibre as insulation material
High quality MoSi2 rods
Heating from two sides
High sealing performance, Max vacuum level up to 1Pa
Available for inert gases such as N2, Argon etc.
Thermocouple type B (1760 °C)
Temp Controller Yudian 518P (32 segments)
Optional Accessories
Industrial Chiller
Vacuum gauge
Extra set of SiC heaters
Vacuum pumps
Mass flow meter
Built-in RS485 port and USB adaptor for computer control
Model No. | TMax (℃) | Inner Chamber Dimensions （mm） | Volume （I） | Power Supply | ||
W | D | H | ||||
STZ-8-17 | 1700 | 200 | 200 | 200 | 8 | 5KW/1-Phase |
STZ-12-17 | 1700 | 200 | 300 | 200 | 12 | 6KW/1-Phase |
STZ-20-17 | 1700 | 250 | 320 | 250 | 18 | 7KW/3-Phase |
STZ-36-17 | 1700 | 300 | 400 | 300 | 36 | 13KW/3-Phase |
Note:Chamber Size could be customized as per requests
Email：inquiry@saftherm.com
Служить：service@saftherm.com
Mob/WhatsApp: +86 1893900 3516
Тел.: +86-379-64883966
факс :+86-379-65159884
Адрес: Китай, пров. Хэнань, район развития высоких технологий г. Лоян Китайской пилотной зоны свободной торговли, ул. Чинчэн №6
запрос
все права защищены：Henan Sante Furnace Technology Co., Ltd.
CoCo
